Dive and Swim
RJE TAC-200 Navigation Board with Analog Depth Gauge and Dive Chronometer
Designed for the U.S. Navy and Army Special Forces, the TAC-200 navigation board is smaller and lighter than the original TAC-100 navigation board, but has a larger compass which is easier to read in poor visibility. Using the latest in luminous technology allows divers to operate in the dark for 6 to 8 hours. The TAC-200 featured here comes with a MegaSport Analog Depth Gauge, and Dive Chronometer (Casio G-shock).
Navigation boards are made for 'continuous and precise navigation’. You swim, count kicks: "one - scan area in front of you, two - check your headings, three - check your depth, four- check your teammate, five - check the timer and all over again". Timer combines with counting the kicks provide you with an estimation of your speed and distance covered. Precise depth gauge, keeps you at the safe depth - to shallow and you can be detected, to deep and specially on O2 rig.
Field picture: sourced from Goggle Images.
UWATEC Compact Depth Gauge
Used by US military combat divers since the 1990s
Full metal case, 6cm diameter, 8.7 oz
Luminous dial, 0 to 90 feet
Made in Switzerland
Field picture: sourced from Goggle Images.
US Divers Wrist Compass
Used by US military combat divers since the1990s.
Easy to read luminescent dial. Side window for level reading.
Full size wrist compass. Attached with boot and rubber wrist strap
4.7 oz. 6.5cm diameter.
Field picture: sourced from Goggle Images.
US Divers / Aqua Lung Wraparound Mask (Military version)
The Wraparound Mask continues to be the mask of choice for Military and Search and Rescue Departments worldwide. The Wraparound mask has been modernized with a redesigned skirt for improved fit, metal buckles, and black non-reflective stainless steel frame.
Classic three-window design. All Stainless Steel Frame construction with Black non-reflective coating. Stainless Steel Buckles with Black non-reflective coating. Redesigned Black silicone skirt for improved fit. Tempered glass lens.
Featured a plastic cable clamp + metal base plate installed at the top of the mask frame.
Kirby Mogan M48 MOD-1Full Face Dive Mask
The Kirby Mogan M48 MOD-1 Full Face Dive Mask is the next generation of the popular original M48 mask. It has been tested and certified by Dive Lab Inc. Configuration in both open and closed circuit mode has been tested and approved for use by the U.S. Military.
The mask features the unique 2-cavity design. This allows the lower pod to be removed while topside to conserve air, and allows normal speech while diving. It may also be used with a variety of different communication systems.
The lower pod is removable under water to allow making gas switches, and to share gas in the event of an emergency. The evolution of the mask has given way to a dramatic increase in visibility, an improved buckle system, 5 leg straps, a mechanical equalizing device, and a variety of options for mounting external components, (lights, cameras etc.).
All of the components have been strengthened to bring this mask to a commercial level of ruggedness you will not find in any other lightweight full face mask. Future innovations for the mask are underway and because this mask has many available mounting options, it will be able to accept new components by Kirby Morgan, thus making it truly modular.
Photos feature:
Draeger LAR-V Setup: Mk48 MOD-1 Dive Mask + Mk25 Scuba Pod + Draeger LAR-V Rebreather mouthpiece + XCEL Diving Hood.
Kirby Mogan Pods: Mk25 Scuba Pod, Mk15 Pod, and Rebreather Pod.
Kirby Morgan M48 MOD-1Full Face Dive Mask + Rebreather POD
The Kirby Mogan M48 MOD-1 Full Face Dive Mask is the next generation of the popular original M48 mask. It has been tested and certified by Dive Lab Inc. Configuration in both open and closed circuit mode has been tested and approved for use by U.S. Military organizations. The mask features the unique 2-cavity design. This allows the lower pod to be removed while topside to conserve air, and allows normal speech while diving. It may also be used with a variety of different communication systems. The lower pod is removable under water to allow making gas switches, and to share gas in the event of an emergency. The evolution of the mask has given way to a dramatic increase in visibility, an improved buckle system, 5 leg straps, a mechanical equalizing device, and a variety of options for mounting external components, (lights, cameras etc.).
Rebreather POD with switchover regular. The Kirby Morgan® Rebreather POD , also referred to in the past, as the NATO POD, with switch over regulator is designed to be used in operation with the Kirby Morgan® M-48 MOD-1 and SuperMask® modular full face masks. Bailing out to an off-board gas and going off the “loop” or switching gasses underwater is as simple and straight forward as turning a handle on the front of the POD. This Modular design also allows the diver to release the POD underwater to accept alternate air sources without ever removing the mask. The Rebreather POD requires unit specific hose adaptors to connect to commercial / military rebreather units.
Kirby Morgan M-48 Supermask + Scuba pod Assy. + Kirby Morgan SuperFlow Scuba Regulator + Ocean Technology Systems Earphone / Microphone Assemblies
The patented Kirby Morgan M-48 SuperMask® is a lightweight modular full face mask that allows for easy and rapid adaptation to various self-contained underwater breathing apparatuses as well as surface supplied systems. The SuperMask, was designed for use with rebreathers, as well as open circuit SCUBA, and lightweight umbilical supply. The SuperMask has been tested and certified by Dive Lab Inc. Configuration in both open and closed circuit mode have been tested and approved for use by U.S. military organizations. The mask features the unique 2-cavity design. This allows the lower pod to be removed while topside to conserve air, and allows normal speech while diving. It may also be used with a variety of different communication systems.
The mask frame and rigid components are made of high impact plastic. The face seal is made of the highest quality silicone and conforms to the diver's face. The modular removable mouth pod is designed to quickly interchange allowing the diver multiple breathing gas options. The mask is also designed to accept various wireless communications configurations.
The removable lower pod is a feature unique to the Kirby Morgan® M-48 Modular Full Face Masks. When diving, the pod is easily removed and replaced on the mask for diver capability to buddy-breathe, use a snorkel or an octopus or perform an "in water" gas switch. With the pod sealed to the mask, the flexible, silicone pod cover allows the diver to quickly place the regulator mouthpiece into the mouth or dive with it free of the mouth for communications. With the mouthpiece in the mouth, the regulator may be used without the pod being sealed to the mask.
Ocean Technology Systems (OTS) Earphone/Microphone Assemblies are designed to allow the user to connect either Hard-wire or Through-water communications to a helmet or full face mask (FFM). The configurations can be endless depending on the application. Standard E/M Assemblies include a Push-to-Talk (PTT) button used only for through-water communications, dual 150-ohm earphones, earphone covers, and a ME-16R Hot Mic® noise canceling, salt-water resistant, pressure-resistant studio quality microphone.
